Engine Rebuild Porsche Cayman 987
Is there a noise in your engine or a suspicion about its behaviour? From a minor issue to a cylinder bore scoring, a worn crankshaft, an IMS failure, a valve problem, oil in the coolant, coolant in the oil, a seized engine or even a connecting rod that went through the block, we have a solution to every problem.
With clear pricing and no surprises for each possible intervention, we strive to guide each customer as best as possible according to his issue, but also his repair budget.
In case of doubt, do not hesitate to contact us to speak to a specialized technician.
Engine rebuild "0km" with cylinder and IMS upgrade
–Crankshaft, blocks, oil pump and cylinder heads check
– Blocks boring and replacement with 6 cast iron cylinders
– Valve stem seals, valve guides and lapping
– Set of gaskets/cylinder head gaskets
– Connecting rod/crankshaft bearings
– Chains and their guides
– Chain tensioners
– IMS bearing
– Segments
ATTENTION: an extra will be applied if one of these elements is damaged; Crankshaft (following cast connecting rod/crankshaft bearing isssue), cracked/drilled block or cracked/porous cylinder head.
PRICES
Rebuild M97.20 (2,7L – 245hp) : 9990€ inc. VAT
Rebuild M97.21 (3,4L – 295hp) : 10990€ inc, VAT
Package engine removal/refitting/maintenance: 1990€ inc.VAT
Package stripping down engine accessories, wirings/refitting: 550€ inc.VAT
Engine maintenance = water pump, thermostat, crankshaft oil seal, spark plugs, accessory belt, oil filter, exhaust gaskets, engine oil, coolant and power steering fluid top-up.
Prices for spare parts DEPENDING ON MOTORIZATION
Cranckshafts
M97.20 (2,7L – 245hp) : 2099€ inc. VAT
M97.21 (3,4L – 295hp) : 2499€ inc. VAT
Blocks
M97.20 (2,7L – 245hp) : 1999€ inc. VAT
M97.21 (3,4L – 295hp) : 2499€ inc. VAT
Cylinder heads
M97.20 (2,7L – 245hp) : 899€ inc. VAT
M97.21 (3,4L – 295hp) : 949€ inc. VAT
VARIOUS ENGINE INTERVENTIONS PRICES
Removing/refitting of 1 head = 1650€ inc.VAT
Removing/refitting of 2 heads = 3000€ inc.VAT
+ price of cylinder head(s) if necessary + price of engine removal/refitting/maintenance if necessary
(Pressure test, valve stem seals, lapping, cylinder head gasket, cylinder head screws)
IMS bearing replacement manual gearbox = 1690€ inc.VAT
IMS bearing replacement Tiptronic gearbox = 2390€ inc.VAT
(IMS, engine oil, oil filter, crankshaft oil seal)
Only available for the first series
Supply and installation of a deep oil sump partitioned/ribbed = 590€ incl.VAT
(Needs engine oil change)